Publicidad
1
EXTEND THE LEGS.
Remove the leg kit from its carrying case. Loosen the
knob as shown and extend the leg. Make sure the
knob is seated in one of the 3 slots and that each leg
is equally extended. Fully retighten the knob.
2
INSTALL THE LEGS.
Insert each of the 4 legs into the receivers as shown. Loosen the knob as necessary, and be
sure the post of the knob is within the channel on the reciever, then tighten the knobs fully.
Instruction #1036122A-Page 2 of 5
4X
4X
4X
4X
Publicidad
