Fagor FF6012 Manual De Instalacion Y Uso página 84

STARTING UP AND
6
BLOCK FUNCTION SELECTION
Start/pause button
a To start up the washing machine you
have to press the start/pause button.
On display models the minutes remaining
until the end of the wash are displayed
throughout.
Block function selection
Available on display models.
The various buttons can be blocked to prevent
them from being pressed and affecting the
selected wash programme and options. This
can be used to stop children playing with the
buttons, etc.
The block function should be activated after
the wash programme has been selected
together with all its options.
Activating the block function
a The block function is activated by
pressing the start/pause button and
holding it down for at least 3 seconds.
The display will show if it is activated.
Deactivating the block function
b The block function is cancelled when
the wash programme comes to an end.
If you want to deactivate the block
function before the end of the
programme, you have to hold the start
button down again for at least 3 seconds.
After 3 seconds, the block function
indicator will disappear from the display,
and it will go into pause status.
The ON/OFF button does not cancel
the block function.
STARTING UP
BLOCK FUNCTION
using the appliance
a
a
b
84