Publicidad
Deflation
For Spa Tub Wall:
1.
Unscrew the cap to reveal the stem, push the stem in
and turn 90 degree right to secure it in the down
position (see drawing 9).
2.
Once the deflation is completed, push the stem in and
turn 90 degree left to return it to the inflation position.
3.
Replace the cap back.
NOTE: To deflate the spa tub for storage, see
"STORAGE" section.
For Cover Air Bladder:
1.
Pull valve cap out and squeeze the valve at its base until deflated.
2.
Close and recess the valve back.
The spa tub inflation/deflation valve incorporates an "air pressure release" function that automatically
releases excess air when the spa tub internal pressure is between 1.5 - 2.5 psi (0.103 - 0.172 bar).
Air pressure release valve.
Colder temperatures at night
cause the spa to seem less
inflated.
S AVE THESE INSTRUCTIONS
(344IO) SPA (JET + BUBBLE) ENGLISH 7.5" X 10.3" PANTONE 295U 08/09/2019
SET UP (continued)
IMPORTANT
Inflation of spa in the morning.
Air expands in the midday
heat and correct air
pressure is restored.
English
Air expands in the midday heat.
Air pressure release valve kicks
in and releases excess air.
Page 13
344
A
9
Publicidad
