Publicidad
OPERATION (continued)
Temp set
HST
HDT
at (
o
C/F)
40/104
000H
000H
40/104
000H
005H
40/104
012H
005H
40/104
012H
000H
NEVER use the spa if indicated water temperature is more than 40°C (104ºF).
S AVE THESE INSTRUCTIONS
(344IO) SPA (JET + BUBBLE) ENGLISH 7.5" X 10.3" PANTONE 295U 08/09/2019
Heater Function Setting Examples
HST
&
HDT
functions are off. Heating system has to be activated
manually by pressing (
for details.
The heater will continuously heat until the temperature
is reached and then hold at that temperature.
Turn the heater on and set a run time at which point the heater
will turn itself off. The heater will continuously heat until the
temperature is reached and then hold at that temperature until the
5 hours run time has expired,
has reached 40°C/104°F or not.
Turn the heater on some time into the future to a set temperature
and set a run time at which point the heater will turn itself off. The
heater will start after 12 hours and continuously heat until the
temperature is reached and then hold at that temperature until the
5 hours run time has expired,
has reached 40°C/104°F or not.
Turn the heater on some time (in hours) into the future to a set
temperature. The heating system will start after 12 hours, and
continuously heat until the water reaches 40°C/104°F and then
hold at that temperature.
1-2°C (1.8-3.6°F) below the set temperature the heating system
will restart. When the flame icon on the display is red, the heating
system is activated. When the flame icon turns green, the water
is at the set temperature. The heating system is at rest and the
filtration system will continue working nonstop.
WARNING
Action
) button. See "Spa Control Panel" section
regardless if the water temperature
regardless if the water temperature
When the spa water temperature drops
344
English
A
Page 19
Publicidad
