Publicidad
OPERATION (continued)
Function
ON
Jet Nozzle Adjustment
-
+
The amount of water and pressure coming out from the jet nozzles can be adjusted by
turning the jet nozzle rim clockwise (maximum water output), counterclockwise (low water
output) or anything in between.
Closing one or 2 jet nozzles will divert more water pressure to the other jet nozzles.
NOTE: Keep the spa control panel within 5m (16ft) range of the control base to ensure good wireless
transmission signal.
-
+
S AVE THESE INSTRUCTIONS
(344IO) SPA (JET + BUBBLE) ENGLISH 7.5" X 10.3" PANTONE 295U 08/09/2019
OFF
Information shown on LED display alternates between
Remaining filter pump time and water temperature
Remaining
Remaining HST time and water temperature first. Then
remaining HDT time and water temperature.
Remaining
Water temperature and remaining sanitation time
Water temperature and remaining sanitation time
HST
time and water temperature
HDT
time and water temperature
344
English
A
Page 20
Publicidad
