Ruark Audio RS1 Guia Del Usuario página 5

About your RS1
Your RS1 is an active subwoofer and is
designed to be connected to an audio system
with a dedicated subwoofer output (Sub-out).
Most active loudspeakers and AV receivers,
have a dedicated subwoofer output, but
your RS1 will also work when connected to
a system with volume-controlled output
(Pre-out). In this case, we recommend you
only connect one of the channels (L or R) as
its input is mono and low frequency signals
contain negligible stereo content.
Setting up your RS1
● For best bass reinforcement, place your
RS1 Sub on the floor near or within a few
metres of your system speakers.
● Position it with its back near a wall but
avoid placing it in a corner as this often
results in boomy and inconsistent bass.
● Connect the subwoofer output from your
audio system to your RS1 input using the
supplied interconnect cable.
● Connect the power cable to your RS1 and
then connect it to a mains power socket.
The orange standby LED (
to indicate your RS1 is in standby.
● Your RS1 will automatically turn on when it
detects an audio signal. The blue On LED (
) will illuminate.
) will illuminate