Nolan N-Com R Serie Manual De Instrucciones página 43

FOR N87, N80-8 and N100-5 HELMENTS ONLY – positioning the keypad
Important: Installation of the keypad on the N87, N80-8, N100-5 helmets requires the use of the
"KEYPAD ADAPTER" accessory, which is included in the package.
•
Insert the support specific for your helmet in the flex cable of the keypad (Fig. 15).
•
Rotate the keypad support so as to position it like in Fig. 16, then hook it to the keypad.
•
Fix the cable inside the helmet and make sure the left fixing clip snaps into its housing (Fig. 17).
•
Open the rubber cap of the B902 system.
•
Reassemble the gasket and secure it with the specific screw.
•
Hook up the keypad to the helmet by clicking in the relevant hooks (Fig. 18).
•
The proper positioning of the keypad is illustrated in Fig. 19 and in Fig. 20.
Fig. 15
Fig. 17
Fig. 19
LETTER ON THE ADAPTER
A
C
COMPATIBLE HELMETS
N100-5/PLUS, N87/PLUS
N80-8
Fig. 16
Fig. 18
Fig. 20
11