Publicidad
Idiomas disponibles
Idiomas disponibles
16.2 Returning the Unit to Service After Decommissioning
Procedure
1. Thoroughly clean the unit. Refer to System Maintenance and Service.
2. Check that the unit is in operating condition.
3. Install the unit and put it into operation. Refer to Installation Procedure.
16.3 Final Decommissioning or Disposal
Final decommissioning or disposal of the unit must be performed in accordance
with the regulations of the country of use.
Contact JULABO to return end-of-life units through the official website at
https://www.julabo.com/en-gb/contact or contact a company specializing in the
disposal and recycling of equipment.
16.4 Disposal of Operating Materials
The operating materials of the unit can be hazardous to the environment and to
health.
16.5 Return of the Unit to JULABO
Declaration of decontamination
Before re-shipment of the unit a declaration of decontamination must be sent to
JULABO.
Make sure the operating materials are disposed of or recycled according to
local regulations.
Also, the safety specifications of the coolant manufacturer must be obeyed.
Decommissioning and Disposal
115
Publicidad
