Publicidad
Idiomas disponibles
Idiomas disponibles
Overview
Mounting
Before mounting this product, read the
hardware and/or surface are capable of supporting the weight of the product.
Mounting Diagram
6M screw
Technical Specifications
Dimensions and Weight
Length
7.09 in (180 mm)
Note: Dimensions in inches are rounded.
Power
Power Supply Type
Switching (internal)
Output Power Rating
92.5 W
Parameter
Maximum Consumption
Maximum Operating Current
Power I/O
Power Input Connector
Power Cable plug
POE Cabling
Required Cable Type
CAT6/A, shielded
Cable Plug
RJ45, CAT6/A, Shielded
Parameter
Total Max Cable Length
Thermal
Operating Temperature Range
-4 °F–113 °F (-20 °C–45 °C)
Ordering
Product Name
LΩGIC POE Injector
LΩGIC POE Injector QRG Rev. 1
QUICK REFERENCE GUIDE
Power in
Safety
Notes. Use at least 2 mounting points per product. Make sure the mounting
Width
5.24 in (133 mm)
Range
100 to 240 VAC, 50/60 Hz
Output Voltage
56 VDC
100 V, 60 Hz
120 V, 60 Hz
150 W
150 W
1.50 A
1.25 A
U.S./Worldwide
Seetronic TRUE1
Edison (U.S.)
Minimum Conductor Diameter
23 AWG (0.5733 mm)
Cable Terminator
T568B standard
Injector to First Fixture
328 ft (100 m)
Maximum Surface Temperature
158 °F (70 °C)
Item Name
LOGICPOEINJECT
Power indicator
Ethernet in
Height
1.77 in (45 mm)
Voltage Selection
Auto-ranging
Output Device Support
POE++, IEEE 802.3 bt, type 4, up to class 8
208 V, 60 Hz
150 W
0.72 A
Conductor Material
Solid bare copper wire (stranded not supported)
Recommended Cable (or equivalent)
Injector to Last Fixture
460 ft (140 m)
Item Code
01542006
POE (Power Over Ethernet)
type indicators
POE out
Teardrop bracket
Weight
1.8 lb (0.9 kg)
Recommended Power Cable
3 x 14 AWG
230 V, 50 Hz
240 V, 50 Hz
150 W
150 W
0.66 A
0.63 A
UK/Europe
Seetronic TRUE1
Local Plug
Belden 2413F, 2412F
First Fixture to Last Fixture
131 ft (40 m)
Cooling System
Convection
UPC Number
781462223540
EN
2
Publicidad
