Ravaglioli KPH-40ECGA Manual De Uso Y Mantenimiento página 20

CAUTION: DO NOT go under vehicle if locking
latches are not engaged.
WARNING: Before attempting to lift pickup
trucks or other truck frame vehicles, be sure
that:
A. Vehicle frame is strong enough to support it's
weight and has not been weakened by modification or
corrosion.
B. Vehicle individual axle weight does not exceed one-
half lift capacity.
C. Adapters are in secure contact with frame at vehicle
manufacturer recommended lift points.
D. Vehicle is stable on lift and neither front nor "tail"
heavy.
E. The overhead switch bar will contact the highest point
on the vehicle.
5. While Using Lift:
A. Avoid excessive rocking of vehicle while on lift.
B. Always use safety stands as needed or when
removing or installing heavy components.
CAUTION
Always use
safety stands when
removing or installing
heavy components.
c
20
WARNING
WARNING
Do not override Remain clear of lift
self-closing when raising or
lift controls.
lowering vehicle.
c
6. To Lower Lift:
A. Remove all tools or other objects from lift area.
B. Raise lift off locking latches.
C. Pull latch release handle fully and hold.
D. Push lowering valve handle to lower, Fig. 3.
Note: Both latch release and lowering valve
handles are deadman-type design. Each
must be held down to lower lift. Do not
override self-closing lift controls.
7. Remain clear of lift when lowering vehicle.
Observe pinch point warning decals.
8. Remove adapters from under vehicle and swing
arms to full drive-thru position before moving
vehicle.
9. If lift is not operating properly, Do Not use until
adjustment or repairs are made by qualified lift
service personnel.
SAFETY
INSTRUCTIONS
Do not operate
a damaged lift.
c c
0496-M004-0
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
for safe operation.
SAFETY
WARNING
INSTRUCTIONS
Proper maintenance
Keep feet
and inspection
clear of lift
is necessary
while lowering.
for safe operation. c
c
c