MAINTENANCE INSTRUCTIONS
If you are not completely familiar with automotive
lift maintenance procedures; STOP: Contact factory
for instructions. To avoid personal injury, permit only
qualifed personnel to perform maintenance on this
equipment.
•
Always keep bolts tight. Check periodically.
•
Always keep lift components clean.
•
Always if oil leakage is observed, call local
service representative.
•
Always if electrical problems develop, call local
service representative.
•
Daily: Check cables and sheaves for wear.
Observe for frayed cable strands. Wipe
cables with a rag to detect hard to see small
broken cable strands. Replace cables showing
any broken strands. Replace worn parts as
required with genuine parts.
•
Daily: Inspect adapters for damage or
excessive wear. Replace as required with
genuine parts.
WARNING
Clear area if vehicle
is in danger of falling.
WARNING
Remain clear of lift
when raising or
lowering vehicle.
WARNING
Do not override
self-closing
lift controls.
21
SAFETY
WARNING
INSTRUCTIONS
Position vehicle
Do not operate
with center of gravity
a damaged lift.
midway between
adapters.
c
c
CAUTION
WARNING
Avoid excessive
Use vehicle
manufacturer's
rocking of vehicle
lift points.
while on lift.
c
c
CAUTION
WARNING
Use height extenders
Keep feet
when necessary
clear of lift
to ensure
while lowering.
c
c
good contact.
•
Monthly: Check equalizer cable tension. Adjust
per lift installation instructions. If there are no
more threads available for adjustment, replace
the cable. Do not use washers to stand off the
nut to use previously used threads.
•
Monthly: Lubricate the six inside corners of the
columns with heavy duty bearing grease.
•
Monthly: Lubricate locking latch shafts. Push
latch handle several times for oil to penetrate
pivot points.
•
Every 3 Months: Check anchor bolts for
tightness. Anchors should be torqued to 90 ft/
lbs (122 Nm).
•
Semi-Annually: Checkfuid level of lift power
unit and refill if required per lift installation
instructions.
•
Replace all caution, warning or safety related
decals on the lift if unable to read or missing.
CAUTION
Authorized personnel
only in lift area.
c
c
CAUTION
SAFETY
INSTRUCTIONS
Always use
safety stands when
removing or installing
heavy components.
c
c
CAUTION
Read operating
and safety manuals
before using lift.
SAFETY
INSTRUCTIONS
Auxiliary adapters
may reduce
load capacity.
c
c
Do not operate
a damaged lift.
0496-M004-0
SAFETY
INSTRUCTIONS
Proper maintenance
and inspection
is necessary
c
c
for safe operation.
The messages and pictographs
shown are generic in nature and
are meant to generally represent
hazards common to all automotive
lifts regardless of specific style.
Funding for the development and
validation of these labels wa s
provided by the Automotive Lift
Institute, PO Box 33116 Indialantic,
FL. 32903-3116.
They are protected by copyright.
Set of labels may be obtained from
ALI or its member companies.
c
C 1992 by ALI, Inc.
ALI/WL101s
21