Getting To Know Your Miter Saw - Bosch 3915 Instrucciones De Funcionamiento Y Seguridad

Getting To Know Your Miter Saw

24
29
21
22
18
16
17
16
To avoid injury from accidental start-
WARNING
!
ing, remove plug from power source
outlet before making any adjustments.
1. Switch "Lock-OFF" Button
This button must be pressed to activate the power
switch.
2. Power Switch
The power switch used with the "Lock-OFF" button
energizes the unit.
3. Switch Handle
This handle contains the switch. The blade is low-
ered into the workpiece by pushing/pulling down on
the handle.
4. Arbor Lock
Allows the user to keep the blade from rotating while
25
23
20
7
15
14
1
27
26
19
13
tightening or loosening arbor screw during blade
replacement or removal (Figure 34, page 28).
5. Lower Blade Guard/Lower Guard Lip
The lower blade guard helps protect your hands from
the spinning blade. It retracts as the blade is low-
ered. Lip can be used to raise the lower guard when
guard becomes jammed on a workpiece.
6. Blade
Use only 10" blades with 5/8" arbor hole.
7. Fence
Supports the workpiece. The fence has a cast in
scale to make repetitive cuts easy. The fence also
has holes which are used to secure an auxiliary
fence if desired.
8.
3
2
4
5
6
7
8
9
12
11
10