cecotec POWER BLACK TITANIUM 2200MAX SMOOTH Manual De Instrucciones página 33

- If a problem has arisen during use, do not disassemble the main body of the blender (main
unit) yourself; there are no user-serviceable parts inside. Contact the official Cecotec
Technical Support Service for repair.
Warning:
- Handle the blades with care.
- Do not use cleaners, steel wool or other abrasive materials.
- Do not use benzine, alcohol, thinners, etc.
- The blender parts are not dishwasher safe.
5. TROUBLESHOOTING
For the following minor malfunctions, please try to solve the problem yourself before
contacting the official Cecotec Technical Support Service.
Problem/Error
Blender does not
switch on
The blender makes
abnormal noise or
strong vibrations
Possible cause
1. Loose or defective
plug.
2. Blown fuse in the
cable or in the
housing.
3. Problems with the
power button.
4. Problems with the
cable or plug.
1. Food stuck in the
blades.
2. Unstable or
unbalanced base.
3. Wear and tear of
blades or jug.
4. Motor fault.
Possible solution
1. Make sure that the plug is
properly connected.
2. Replace the fuse or check the
electrical installation.
3. Contact the official Cecotec
Technical Support Service.
4. Repair or replace the cable or
plug if necessary.
1. Switch off the blender and unplug
it, then remove the stuck food.
2. Make sure the base is placed on a
stable surface.
3. Check the condition of the
blades and jug, replace them if
necessary.
4. Contact the official Technical
Support Service of Cecotec
POWER BLACK TITANIUM 2200MAX SMOOTH
ENGLISH
33