Publicidad
Idiomas disponibles
Idiomas disponibles
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.pdf, Cycle:5, Status:Approved
Damaged power cables should be replaced by a competent person or qualified
electrician.
For domestic use only.
Never place an empty pan on the hob as this will cause the overheat sensor to switch off
the appliance automatically.
When a cooking zone has been on for a long time, the surface remains hot and shows "H"
in the display.
If the surface of the hob becomes cracked, do not use, switch off the appliance at the
fused spur and contact customer services.
Do not place rough or uneven vessels on the hob, as they could damage the glass
surface.
Avoid banging pots and pans down on the hob. The induction surface is tough but not
unbreakable.
Do not put detergents or fl ammable materials beneath the hob.
• The appliance should be cleaned after use, allow to cool fi rst!
• The surface of the induction hob should be cleaned as follows:
Type of dirt
Limescale
Burnt-on stains
Light stains
Melted plastics
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.indd 94
202161_s1_s1_5059340093833-5059340093840_C&L_A5_IM_Multi_V04.indd 94
Printed by Henry Leung, 06/05/2021 01:52:54
Care & maintenance
Entretien et maintenance
Pielęgnacja i konserwacja
WARNING: Always switch off the electricity supply before performing maintenance
work. In the event of a fault, contact customer services.
Cleaning method
Apply white vinegar to the surface, then wipe it dry
with soft cloth
Clean with damp cloth and dry it with a soft cloth
Clean with damp cloth and dry it with a soft cloth
Use a scraper suitable for induction glass to
remove residue
îngrijire și întreținere
Cuidado y mantenimiento
Cuidados e manutenção
Cleaning materials
Special induction cleaner
Special induction cleaner
Cleaning sponge
Special induction cleaner
28-04-2021 17:43:26
28-04-2021 17:43:26
page 95 of 108 pages
94
Publicidad
