Publicidad
Idiomas disponibles
Idiomas disponibles
CARTON
CONTENTS
Check carton contents against the fol-
lowing list,
Model
358.341161
• Chain Saw (fully assembled)
• Bar Sheath
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance
or find
that parts are missing or damaged,
please call 1-800-235-5878
ASSEMBLY
Your unit is fully assembled;
no assem-
bly is required.
KNOW YOUR CHAIN SAW
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations
with your unit to familiarize
yourself with the
location of the various
controls and adjustments.
Save this manual for future ref-
erence.
Bar Oil Cap
!_._.._J-
Hand Guard
/'-."."."."."._"
_IIll
Chain Adjustment
Screw
Trigger
Loe k - o u_._..,j...,_.f_.,_5_
/
Button_
Powe
ocket
Cord
" _
Trigger
Oil Levet
Bar Clamp _'
Chah_
Hole
Switch
Indicator
TRIGGER
SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze
the trigger switch
to operate the unit after lock-out
but-
ton has been pushed forward. Release
the trigger to turn the unit off.
TRIGGER
LOCK-OUT
BUTTON
The TRIGGER LOCK-OUT button is a
control feature designed
to prevent the
motor from being accidentally
started.
When the rear handle is gripped in a
normal cutting position, the trigger
lock-out
button can be pushed forward
by the thumb, permitting the index fin-
ger to squeeze
the trigger. It is not nec-
essary to maintain pressure
on the
trigger lock-out
button once the trigger
has been engaged.
BAR OIL CAP
The BAR OIL CAP is used to fill the bar
oil tank.
CHAIN ADJUSTMENT
SCREW
The CHAIN ADJUSTMENT SCREW is
used to adjust the chain tension.
POWER CORD
The POWER CORD is used to connect
the chain saw to an approved
exten-
sion cord.
CHAIN TENSION
It is normal for a new chain to stretch
during first 30 minutes
of operation.
You should check your chain tension
frequently.
Readjust chain after every
15 minutes of operation.
See CHECK
CHAIN TENSION under the SERVICE
AND ADJUSTMENTS section.
OPERATING
INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT
AN EXTENSION
CORD
Extension cords are available for this
unit at Sears.
MINIMUM WIRE GAUGE
RECOMMENDATIONS
25ft.
50ft.
100 ft.
Volts
(7.67 M)
(15.24 M)
(30.48 M)
16
16
14
120
A W.G.*
A.W.G*
A.W.G.*
• American
Wire
Gauge
Publicidad
