Publicidad
Idiomas disponibles
Idiomas disponibles
1
DROP-IN INSTALLATION
Using the template provided, locate the position of the sink on the above counter. Provide
proper clearance under the countertop for the faucet supply lines, drain assembly and the
structural parts of the cabinet.
NOTE: If replacing an existing sink be certain to shut off water supply before removing old sink.
2
Drill a clearance hole inside the
perimeter line of the template
for drop-in installation.
Cut opening around the
perimeter of the template.
3
Mount the faucet and drain assembly (not included) on
the sink following the manufacturer's instructions. Be
certain to apply a bead of sealing putty on the underside
of the drain (if required) (Part "A") in order to ensure a
watertight seal between the sink and drain. Remove
excess putty after installing drain on sink.
4
• Place the sink temporarily into the template
• Check for alignment and clearance
• Mark the sink and countertop in several places
as a guide for the installation location.
770279-100 Rev. 2 (7/23)
Perimeter of
Template
Perimeter of
Template
A
Publicidad
