Descargar Imprimir esta página

asalvo baby 14900 Manual De Instrucciones página 16

Trona con ruedas

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
To fasten the harness push the prongs into
the buckle.To release, push theprongs (A) and
remove from the bubckle.Pass the ends of
the shoulder, waistand crotch straps through
the vertical slots in the lower backrest, rotate
the ends,and pull back to secure. The seat
cover should come already positioned on the-
highchair, however it may be necessary to
remove these components for cleaningpur-
poses. To remove the seat insert undo the
harness and thread the shoulderand crotch
straps through the seat insert slots and sim-
ply remove.
EN
lmportant: safety nonte The seat cover may
be sponge cleaned only. lf you feel the need
to remove theseat cover, for ease of cleaning,
please ensure that you carefully follow the
in-structions outlined in part 7 on how to co-
rrectly re-thread the safety harness.
8. ADJUSTING THE SEAT HEIGHT AND RE-
CLINE
Note: Do not adjust the height of the seat
whilst the child is seated in the chair.To ad-
just the height of the seat push in both of the
height adjusting locks (A) and simultaneous-
ly raise or lower the seat, releasing both of
the locks at the required height.
To adjust the angle of the seat, lift the plastic
lever (b) (found on the back of the seat unit)
and position as required height.

Publicidad

loading

Este manual también es adecuado para:

149171643017390