Operation Notes; Introduction; Outlook - Auxilab MEDIBAS+ Manual De Uso

1.1 Operation notes

-
Before centrifugation, make sure the rotor used is adequate and it is correctly installed;
-
During centrifugation (rotor running) or during stop process (but with rotor still rotating), do
not open manually the lid or move the equipment;
-
Use only the original accessories supplied with the equipment. For the use of other
common accessories as glass or plastic containers, it is necessary to make sure they
meet with the requirements of use as resistance to speed or RCF used, etc.
-
Never open the lid during operation;
-
The repair or replacement of mechanical parts and electronic devices of the centrifuge,
must be done only by Nahita Technical Service Department;
-
For a correct use of the equipment it is necessary to select the appropriate rotor load as
well as avoid overloading;
-
Ensure regular checks of the rotor; if rotor has obvious corrosion or damage signs it must
be replaced immediately;
-
Maintenance should be done after a period of use, according to point "Maintenance";

2. Introduction

2.1 Outlook

Figure 1:
Front side
- 33 -