Publicidad
Idiomas disponibles
Idiomas disponibles
4. Intended Use
When you observe the preceding points, and the material to be lifted is clearly defined, you can start with
the lifting operation. Proceed as follows:
1. Attach the lifting magnet to a suitable for
the lifting operation hoist so that it hangs
horizontally
3. Put the lifting magnet on the (clean, flat)
workpiece as shown (Also note Fig.1)
Safety groove
5. Make sure that the Lifting magnet is
completely switched. As an indicator of this
is true, the Safety groove on the gear lever,
has to be completely visible
20
2. Move the lifting magnet with the crane on
the workpiece slowly
4. Turn on the lifting magnet at the
workpiece (from right to left )
?
• Contact surface clean?
• Material thickness respected?
• Dimensions of the workpiece known?
?
• Composition and Temperature
of the Laod respected?
Fig. 1
Publicidad
