Haier H4F306 DH1 Serie Manual De Instrucciones página 25

11 12
13
14
16
15
17
18
19 20
Move ice maker
(The ice maker can move its position according to user usage)
10.10
11. Tilt slightly backwards the cabinet, remove 3
screws and then the lower hinge.
Take lifting shaft sleeve out of the gift bag. Remove
12.
2 bolts, remove the lifting shaft sleeve and lifting
shaft
13. Install the lifting shaft sleeve and lifting shaft in the left
hole and secure 2 bolts.(Adding lubricating oil to the
shaft)
Fix the hinge to the opposite position of the cabinet
14.
with 3 screws.
15.
On opposit side of the door, pull out left side
connection cable and put it through the axe
cover from step 5, mount axe cover. Mount the
hole cover on the right side.
16. Mount the door.
17. Fix upper right upper hinge with 3 screws.
lubricating oil to the upper hinge before installation)
18. Connect the wiring harness as shown in the figure
19.
Install the assembled hinge cover in step 5,
secure the three screws and screw hole
covers
Finished.
20.
In order to protect the ice maker from damage
during transportation, it is installed on the hinge
side, and customers can use it according to their
own needs,Mobile ice maker position.
It is recommended to place the ice maker on b-
oth sides. If placed in the middle position, it may
reduce ice making efficiency
10 - Installation
(Add
(Fig. 10.9):
25