6. Switch off the unit once the hair has dried and the desired style has been achieved.
Allow the brush to cool completely before storing.
MAINTENANCE INSTRUCTIONS FOR THE USER
This device has a thermostat that will close the electrical circuit if the temperature exceeds the
comfort level due to partial obstruction of the air inlet or outlet. In the event that the unit slows
down while in use, turn it off and allow it to cool down. The thermostat will automatically reset.
Maintenance
The brush is virtually maintenance-free. No lubrication is required. Keep all ducts and
openings clean and free of dust, dirt and hairspray. In case the cable becomes twisted,
untwist it before using the brush.
Cleaning instructions
If it is necessary to clean the brush, unplug the power cord and wipe the housing with a
damp cloth. Dust and lint can be removed from the air intake with a small brush.
WARNING: In case of failure, do not attempt to repair. This brush contains no user
serviceable parts.
STORAGE
When not using the brush, always unplug the power cord from the wall socket.
Wait for the brush to cool down and place it in a dry place out of the reach of
children. Never wind the cord around the brush as it may be damaged
prematurely or even cut. To ensure a long service life, the cord should be handled
with care, avoiding pulling and kinking, especially when unplugging it.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical devices, especially when they are within the reach of children, basic
safety precautions must be observed:
12