Technical Information - Orien FS-65IM Manual Del Usuario

Máquinas automáticas para hacer hielo
Ocultar thumbs Ver también para FS-65IM:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

it is your responsibility and obligation to have it replaced with a properly grounded
3-prong wall outlet. The ice maker should always be plugged into its own individual
electrical outlet which has a voltage rating that matches the rating label on the appliance.
This provides the best performance and also prevents overloading house wiring circuits
which could cause a fire hazard from overheated wires. Never unplug your ice maker by
pulling on the power cord. Always grip the plug firmly and pull straight out from the
outlet. Repair or replace immediately all power cords that have become frayed or
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its
length or at either end. When moving the ice maker, be careful not to damage the power
cord.
Extension Cord
Because of potential safety hazards under certain conditions, it is strongly recommended
that you do not use an extension cord with this ice maker.
Model
Rated power
Ice-making rated current
Ice-harvest rated current
Refrigerant
High side pressure
Low side pressure
Width x depth x height
Unit weight
Ice-making capacity
The technical data and performance index listed above should be used for reference only.
They are subject to change.
*
The actual quantity of ice produced per day can vary with room and water conditions

Technical Information

FS-65IM
115VAC ~ 60Hz ~
470W
6.7A
11.2A
R134a, 6.88 oz.
320 psi
120 psi
16.5"x21.3"x32.5" 22.1"x21.3"x32.5" 22.1"x21.3"x32.5"
91 lbs
Up to 65 lbs/day*
FS-85IM
115VAC ~ 60Hz ~
520W
7.3A
11.7A
R134a, 8.96 oz.
320 psi
120 psi
106 lbs
Up to 83 lbs/day* Up to 110 lbs/day*
5
FS-110IM
115VAC ~ 60Hz ~
580W
7.5A
11.8A
R134a, 9.92 oz.
320 psi
120 psi
102 lbs
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fs-85imFs-110im

Tabla de contenido