Salicru SPS.ADVANCE RT2 Manual De Usuario página 59

7.3.2.2. Operating mode / Description of state.
Operating mode / state
Description.
UPS start-up
LCD display.
Description.
No output mode
LCD display.
Description.
ECO mode
LCD display.
Description.
BUCK mode
LCD display.
Description.
BOOST mode
LCD display.
Description.
Battery mode
LCD display.
Description. When an error occurs, the ERROR icon and the fault code are displayed.
Error or fault
state
LCD display.
Tab. 13. Operating modes.
USER MANUAL
When the UPS is started, the display screen of this mode is displayed for a few seconds to initialise the CPU and system.
The UPS is off and no output voltage is available, but it is charging the batteries.
If the input voltage is within the regulation ranges, the UPS supplies the output voltage from the normal mode input.
If the input voltage is above the output regulation range, but within the input range, the UPS supplies output voltage from BUCK mode.
If the input voltage is below the output regulation range, but within the input range, the UPS supplies output voltage from BOOST mode.
Description: When the input / frequency voltage is not within the predefined range of the device or there is an AC mains failure, the UPS
powers the loads from the batteries for a limited time due to their own capacity and activates the audible alarm modulated every 5 seconds.
SPS.ADVANCE RT2 UNINTERRUPTIBLE POWER SUPPLY (UPS)
59