Descargar Imprimir esta página

Zeiss DIATHERMY BIPOLAR CABLE Instrucciones De Uso página 2

Publicidad

EN
INSTRUCTIONS FOR USE
DIATHERMY BIPOLAR CABLE
The instructions for use mentioned here are applicable to the following product
numbers:
303060 0250 000 DIATHERMY BIPOLAR CABLE
1.
DISCLAIMER
This device has been designed, produced, and sold for use as described in these
instructions for use. Use that does not correspond to these instructions provided
by ZEISS could harm the patient and/or damage the device itself as well as any
instruments or accessories connected to it.
These instructions for the use of the device must be read along with the instructions
for use for any instruments and/or accessories which will be used with it.
In case of doubt and/or if further information is required concerning the use of
this product and related warranty conditions, please consult your local distributor
or local ZEISS Customer Service before use. This product must not be modified
without the manufacturer's approval.
2
2.
NOTES ON SAFETY
Hazard which leads to harm that can cause death or serious
WARNING!
injuries.
Hazard which leads to harm that can cause injuries with
CAUTION!
medical treatment.
NOTE!
Hazard which leads to harm that can cause injuries without medical treatment.
3.
AREA OF USE
3.1. INTENDED USE
This reusable device is an accessory for ZEISS phaco systems. It has been designed
to connect the diathermy handpieces to the main device during human eye
surgery.
3.2. INDICATION
Cauterization using bipolar diathermy is achieved by sending high frequency
electric current generated by a low voltage unit through tissues. Due to the Joule
effect, the current raises the temperature of the tissue it passes through and
causes the cauterization of the surrounding vessels. Due to its very nature, high
frequency current tends to interest only superficial vessels, therefore guaranteeing
that the phenomenon remains as circumscribed as possible.
3.3. CONTRAINDICATION
Not to be used for patients carrying cardiac stimulator or stimulating electrodes
because of radio frequency interference caused by the diathermy generator!

Publicidad

loading

Productos relacionados para Zeiss DIATHERMY BIPOLAR CABLE

Este manual también es adecuado para:

303060 0250 000