Description And Function; Legal Information - Ottobock 436H1-7 Instrucciones De Uso

1 Indications for use
The 436H1=7 Offset Plate for Modular Armrest Unit (436F1) is to be used
exclusively for the application in combination with wheelchairs and seating
systems/wheel bases for seating systems.

2 Description and function

If the modular armrest unit is too close to or too far from the patient's body,
the offset plate allows adjustment of the entire unit to the outside or inside
by approximately 3 cm.
Single Components (fig. 1):
Item Article No.
1 437A29=7
2 501S72=M6×10
3 Assembly
For mounting the offset plate to the Elevating Swivel Unit, please refer to fig. 2.

4 Legal information

All legal conditions are subject to the respective national laws of the coun-
try of use and may vary accordingly.
4.1 Liability
The manufacturer will only assume liability if the product is used in accord-
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregard of
this document, particularly due to improper use or unauthorised modification
of the product.
4.2 CE conformity
This product meets the requirements of the European Directive 93 / 42 / EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.
Description
Offset plate
Oval head screws
Quantity
1
2
Ottobock | 5