Publicidad
Idiomas disponibles
Idiomas disponibles
12 INSTALLATION
INSTALLATION
• The exterior or components of the product may vary depending on the model.
Before Installation
Unpacking the Appliance
Unpack the appliance and remove all packing tape
and the filter packaging before using the
appliance.
1
Take the product out of the box, and remove
the packaging and tape attached to the
product.
2
While facing the front of the product, hold
and gently pull both sides of the air inlet
(cover) to remove it.
• The side with the LG logo on the display is
the front of the product.
3
Remove the filter and dispose of the
packaging.
4
Install the filter into the product.
• Make sure that the side with the filter
handle is facing up.
5
To reinstall the cover, insert the tabs at the
bottom of the cover into the groove at the
bottom of the product and close the cover.
CAUTION
• Be sure to remove the protective packaging
from the filter before using the product.
• When installing the filter, pay attention to the
direction of the filter.
- Failure to do so may cause malfunction or
product failure.
- The side with the filter handle is the top.
Transportation Requirements
• Before moving or storing the product, wrap the
cord around the lower part of the product to
keep the power plug from touching the floor.
- Failure to do so may damage the power plug
or scratch the floor.
• Do not transport the product by holding its
exterior cover.
- The cover may open and cause the product to
drop. Dropping the product may cause injury
or product failure.
Publicidad
