• Carry the product safely by using the handle at
the back of the product and placing your other
hand at the top front.
Installing the Unit
Installation Location Requirements
Install the product at least 3 1/4 ft (1m) from walls.
• If there is not enough room for air suction, the
air purification performance may be affected.
• The performance of the product may differ
depending on the operating environment
(considering factors such as temperature and
humidity).
- At humidity levels of 40 % – 70 %, the product's
guaranteed performance standards can be
achieved.
• Do not install the product near direct sunlight or
bright lighting.
- Doing so may cause discoloration of the
product.
Installing the Safety Plate
1
Assemble the safety plate as shown.
2
Place the product so that the center line of the
product aligns with the center line on the
safety plate.
3
Assemble the product completely by pressing
it down until it clicks into place.
• If the product is tilted, reassemble it.
INSTALLATION
13