Publicidad
Idiomas disponibles
Idiomas disponibles
Dimensions (L x W x H, without battery) ......... 313 x 143 x 76 mm
Weight (without battery) .................................. ca. 2,2 kg
Working range. (system- dependent) .............. Ø 12 – 40 mm
Application temperature range ........................ 5 – 60°C / 41 – 140°F
Operating mode............................................... S3
Compatible rechargeable batteries ................. RO BP18V AMPShare, ProCORE 18V
Recommended chargers ................................. RO BC18V AMPShare
Sound pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
Measured values determined in accordance with EN 62841-1.
Vibration total value ......................................... ≤ 2,5 m/s
The Vibration Total Value quoted in these instructions and the quoted noise emission values
were measured according to standardized measurement procedures and can be used to com-
pare one electric power tool with another. They can also be used to make an initial estimate of
the loading.
The quoted vibration and noise emissions can vary during actual use of the electric
power tool dependent on the way in which the electric power tool is used, in particular
what type of workpiece is being processed. Establish additional safety measures to
protect the operator which are based upon an estimate of the vibration loading during the actual
usage conditions (in doing so taking account of parts of the operating cycle, for example times in
which the electric power tool is switched and those in which it is switched on but not running
under load).
3
Function of the Unit
The device features Bluetooth connectivity, allowing a connection to be established with the
ROTHENBERGER app via a smartphone. This enables the user to read specific device infor-
mation in real-time. Further details about the connectivity function can be found directly in the
app, which is available in all common app stores.
Optional:
The device can also be carried to transport it using a shoulder strap obtainable as an optional
accessory. Hook the hook on the shoulder strap into the eye.
Using the shoulder strap, the device may only be carried crosswise over the chest and
back and must NOT be carried around the neck!
Only wear without the tool used!
3.1
Battery
Charging the battery:
Use only the chargers listed in the technical data. Only these chargers are matched to
the lithium-ion battery of your power tool!
Note: Lithium-ion rechargeable batteries are supplied par-tially charged according to internation-
al transport regula-tions. To ensure full rechargeable battery capacity, fully charge the recharge-
able battery before using your tool for the first time.
Inserting the Battery:
Push the charged battery into the battery holder until it clicks into place.
Removing the Battery:
To remove the rechargeable battery, press the battery re-lease button and pull the battery out.
Do not use force to do this.
The rechargeable battery has two locking levels to prevent the battery from falling out if the bat-
tery release button is pressed unintentionally. The rechargeable battery is held in place by a
spring when fitted in the power tool.
16
) .............................. 78 dB (A) ¦ K
pA
) .................................. 89 dB (A) ¦ K
WA
ENGLISH
3 dB (A)
pA
3 dB (A)
WA
2
¦ K= 1,5m/s
2
(A)
Publicidad
