Miniland digimonitor 2.4' Manual Del Usuario página 14

ENGLISH
DOWN Nav button (11) until the "view" sub-menu is selected. Enter this
option by pressing the confirmation button (9).
3. Press the UP Nav button (7) or DOWN Nav button (11) to select the
camera you want to view (Camera 1, Camera 2, Camera 3, Camera 4).
4. Press the Confirmation button (9) to go to the selected camera.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
Note: The additional camera reference compatible with this baby
monitor is 89599 digital camera 2.4''.
5.2.9.2.4. SCAN MODE
This function automatically cycles through your paired camera channels
to display each camera for 15 seconds. This function can be used only
when you have more than 1 camera unit paired. To enter in this mode:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the
camera icon is highlighted, and then press the UP Nav button (7) or
DOWN Nav button (11) until the "scan" sub-menu is selected.
3. Press the Confirmation button (9).
Note: If one of the cameras is out of range or not turned on, the
monitor will notify you and the scan mode will stop, indicating an
out-of-range warning on the screen. Bring the monitor closer to the
camera or turn on the camera, and the scan mode will be activated
again, allowing you to view both cameras. To deactivate this mode,
select the desired camera by following the steps in section 5.2.9.2.3.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
5.2.9.3. VOX MODE
This mode allows you to control the sound activation of your baby monitor.
If you activate the VOX mode on the monitor and no sound is produced
around the camera for 15 seconds, the camera will stop transmitting. The
monitor screen turns off when the camera is not transmitting. When the
camera detects any sound louder than the set sensitivity level it will start
transmitting the signal to the monitor again.
To disable this feature and see the area monitored continuously, turn off
the VOX mode on the monitor.
· VOX mode OFF: The camera transmits continuously, allowing you to
monitor your baby or the area you wish to monitor continuously.
· VOX mode ON: The camera only transmits when it detects a sound with
sufficient intensity, according to the level selected, around the camera.
To activate the VOX mode, follow the steps below:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the
VOX icon is highlighted, then press the UP Nav button (7) or DOWN
Nav button (11) to enter the sub-menu.
3. Adjust the sensitivity to the "high" level if your baby usually sleeps
quietly and cries softly, or to the "low" level if your baby tends to make
noises while sleeping or cries loudly before starting to cry.
7. TROUBLESHOOTING
PROBLEM
No reception on the monitor.
POSSIBLE CAUSE
Camera not turned on.
Monitor not turned on.
Camera: not plugged in to the power adapter.
Monitor: The power adapter is not plugged.
Monitor out or range.
4. Press the Confirmation button (9) to save the setting.
5. Press the Menu/Back/Power button (5) to return to the main screen.
6. The VOX icon (E) will be displayed at the top of the LCD screen.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
5.2.9.4. DIGITAL ZOOM
If desired, you can increase the size of the displayed image using the zoom
function. Follow the steps below:
1. Press the Menu/Back/Power button (5) to access the menu.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the Zoom
icon (D) is highlighted, then press the UP Nav button (7) or the DOWN Nav
button (11) to enter the sub-menu.
3. Select the "2x" option using the UP Nav button (7) or the DOWN Nav
button (11), and press the Confirmation button (9) if you want to enlarge the
image. In this mode, you can navigate through the screen using the Monitor
Navigation buttons (UP (7), DOWN (11), RIGHT (10), LEFT (8)). Additionally,
the zoom icon (D) will be displayed at the top of the LCD screen.
4. If you want to return to normal image display, press the Confirmation button (9).
5.2.9.5. TIME SETTING
To set the time, follow the steps below:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the
settings icon is highlighted, then press the UP Nav button (7) or the
DOWN Nav button (11) to enter the sub-menu.
3. Press the RIGHT Nav button (10) or LEFT Nav button (8) to select the
element you want to adjust: the hour or the minutes.
4. Press the UP Nav button (7) to increase the value or the DOWN Nav
button (11) to decrease it.
5. Press the Confirmation button (9) to confirm.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
5.2.9.6. TEMPERATURE UNIT CHANGE
By default, the temperature measurement unit is ºC. If you want to change
it between ºC and ºF, follow the steps below:
1. Press the Menu/Back/Power button (5) to display the menu icon.
2. Press the RIGHT Nav button (10) or LEFT Nav button (8) until the
temperature icon is highlighted, then press the UP Nav button (7) to
increase the value or the DOWN Nav button (11) to enter the sub-menu.
3. Select the desired unit and press the Confirmation button (9) to confirm.
To exit the function, you can do so as follows:
1. Press the Menu/Back/Power button (5).
2. Do not touch the monitor for 30 seconds.
6. MAINTENANCE
• Clean the surfaces of the camera and monitor with a soft, lint-free cloth.
• If the units become dirty, use a lightly dampened cloth to wipe surfaces,
taking care to not allow water into any openings.
• Never use cleaning agents or solvents.
SOLUTION
Plug in the power adapter.
Press and hold down the Power button (5).
Plug in the power adapter.
Plug in the power adapter.
Move the monitor closer to the camera.
14