MSW Motor Technics MSW-GTC-100L Manual De Instrucciones página 36

EN
Installing the Handles
Unscrew the bolts on the front of the drawers or the doors using a Phillips screwdriver to remove the
handle on the back of it, then attach the handle to the front of the door or the drawer using two M5x12
flat head bolts. Repeat for all the doors and drawers. Attach the grab handle to the cabinet, align the holes
and fix with two M8x16 flat head bolts.
Installing the Casters
Lay the rolling cabinet on soft ground. Use the packaging material for protection. Mount four casters to
each cabinet with sixteen M8x20 hex flange bolts. Note: The casters with brakes should be on the front
side of the cabinet.