Descargar Imprimir esta página

Schulz Control I Manual De Instrucciones página 85

Ocultar thumbs Ver también para Control I:

Publicidad

Idiomas disponibles

Idiomas disponibles

THE USER INTERFACE
4- THE USER INTERFACE
Graphic Display; Illuminated monochrome LCD, 128 X 64
2 x LED Indicators
Controller; 8 x tactile button
4.1 - KEYPAD
START: Goes into STARTED condition
STOP: Goes out of STARTED condition
RESET: Resets and clears fault conditions
ENTER: Confirms the selections or value settings
LESS/DOWN: Rolls down the menu, and decreases values
MORE /UP: Rolls up the menu, and increases values
ESC (C): Goes back one navigation level
MENU BUTTON: access to setting pages.
Start and Stop have only one defined function and are used for no other purpose.
The Reset will indicate the fault code on the display, if a fault condition is active, or the compressor status, in case there are no active faults.
If the menu mode is pressed for longer than 2 seconds, it will go out of this mode and return to the interface initial screen.
The Enter will lock a selected item on the display, preventing the return, after a short delay, to the initial screen. A key symbol will be shown
when an item is locked. To unlock, press Esc. The Esc will make the interface return to the main menu.
More, Less, Enter and Esc are used in the menu navigation mode to set the menu items.
4.2 – LED INDICATORS
STATUS: Green, beside the Start and Stop buttons.
FAULT: Red, beside the Stop and Reset buttons.
Indicators Statuses:
ON: Steady Light
FF: Fast Flash: flashes 4 times per second.
SF: Slow Flash: flashes once a second:
IF: Intermittent Flash: Flashes every four seconds.
OFF: Completely off.
Machine Status No.
1
2
3
4
5
6
7
8
9
10
11
12
** SF for alarm condition
Machine Status
Shutdown Error
Start-up initiation
Start-up impediment checking
Start-up impediment condition
Ready to Start
Progressive Shutdown
Standby
Star/Delta Motor Start-up
Load Delay
Load
Load Delay
Unload Time
Stop Time
Status
OFF
OFF
OFF
OFF
(Load required) FF o IF
(Load required) FF o IF
(Load required) FF o IF
(Load required) FF o IF
85
Fault
FF
OFF**
OFF**
SF:
OFF**
OFF**
OFF**
OFF**
OFF**
OFF**
OFF**
OFF**

Publicidad

loading

Este manual también es adecuado para:

Control iiControl iiiControl net