dBTechnologies IS 210T Manual De Uso página 18

2. CONNECTIONS
The audio input and link to another speaker are connected via a terminal block, which is protected under a metal
panel with PG9 cable glands. The panel is easily removed by unscrewing the four screws securing it to the box.
Connect the audio source (e.g., from an amplifier or another speaker) to the INPUT terminal using 2-core cable,
respecting the polarity markings next to the connectors (positive to positive, negative to negative). The audio
signal can be linked to another speaker in a similar way: connect the LINK output of the speaker to the INPUT
terminal of the next speaker using 2-core cable, respecting the polarity (positive to positive, negative to negative).
3. INSTALLATION AND CONFIGURATION
PACKAGE CONTENTS
On opening the IS 210T speaker package, check that no items are missing. The package contains:
• IS 210T speaker
• quick start manual and warranty documentation
ATTENZIONE!
Only expert personnel may use the product and its accessories! To prevent hazards to people,
animals and/or objects, make sure that the installation is stable and secure. Comply with the safety
regulations and laws in force in the country in which you use the product. For safe use, periodically
check that all parts are in good working condition before use. Only authorised personnel may carry
out design, calculations, installation, testing and maintenance of professional flown or stacked audio
systems. dBTechnologies shall not be liable for improper installation without adequate safety
measures.
IS 210T
18
PG9 PANEL
PARALLEL
AUDIO
SPEAKER
SOURCE
INPUT LINK
i Installation must be performed
complying with user's manual
information and to related
instruction provided.
BARRIER STRIP BOARD
Cod. 420120423 REV. 1.0
English