Troy-Bilt 020210 Manual Del Propietário página 14

Section 5: Maintenance
ENGmNE MAmNTENANCE 4.
See the engine owner's manuaH for instructions on how to
property maintain the engine. 5.
[ cAuTlo. I °
CHean area around pump oi[ dipstick. Remove dipstick
and firthpump with recommended oiH to "Full" mark on
dipstick (typically 0.43L or H 5 oz.).
install pump oiH dipstick.
Wipe up any spilled oil
* Used motor oil has been shown to cause skin cancer in
certain laboratory animals.
* Thoroughly wash exposed areas with soap and wate_t
KEEP OUT OF REACH OF CHILDREN. DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED OILTO COLLECTION CENTERS.
Pump Maintenance
Changing Pump oim
Change oil after first 50 hours of operation and then every
2.00 hours or 3 months, whichever occurs first.
NOTE:When changing pump oil, use only high quality
nondetergent 30 weight oil. Use no special additives.
Change pump oil as fommows_"
H. Clean area around brass oil drain plug at bottom of
pump.
2.. Remove oil drain plug. Drain oil completely into an
approved container.
3. VVhen oil has completely drained, install oil drain plug
and tighten firmly.
Data tag information is very important if you need help from
our Customer Service Department or an authorized service
dealer.
° The data tag (Figure H 3) is located on the base of the
pressure washer. For future reference, please copy the
model, revision, and serial number of the pressure washer
in the space below.
MODEL L
REV NO [
SERIAL L
PSI [
GPM L
Copy HodeH
_ Number Here
Copy Revision
Here
Copy Serial
Number Here