Troy-Bilt 020210 Manual Del Propietário página 4

Section 1: Safety RuJes
WARNING
DO NOT touch hot surfaces,
Stay dear of exhaust gases.
Allow equipment to cod before touching,
1
WARNING 1
, DO NOT wear loose clothing, iewetry or anything that may
be caught in the starter or other rotating parts.
, Tie up long hair and remove jeweJr_,_
WARNING 1
, Always wear eye protection when using this equipment or in
vicinity of where equipment is in use.
J wAR.I.G 1
WHEN
ADJUSTING OR MAKING REPAiRSTOYOUR
PRESSURE WASHER
Disconnect spark pJugwire from spark pJugand placewire
where it cannot con_ct spark plug.
CAUTION
DO NOT tamper with governed speed.
DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position,
DO NOT leave spray gun unattended while machine is
running.
NEVER use a spray gun which does not have a trifler lock or
trigger guard in place and in working order:
Always be certain spray gum nozzles and accessories are
correctly attached.
DO NOT point spray gun at glass when in jet spray mode.
NEVER aim spray gun at plants.
If you have questions about intended use_ ask dealer or
contact Brigs & Str_tton Power Products_
NEVER operate units with broken or missing parts, or
without protective housing or covers.
DO NOT by-pass any safety device on this machine.
Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
NEVER move machine by pulling on high pressure hose. Use
handle provided on unit.
Check fuel system for leaks or signs of deterioration, such as
chafed or spongy hose, loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure
washerL
This equipment is designed to be used with Briggs & Stratton
Power Products authorized parts ONLY. If equipment is used
with parts that DO NOT comply with minimum specifications,
user assumes all risks and liabilides_