Publicidad
Idiomas disponibles
Idiomas disponibles
EN
If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Dispose of the battery and
replace with a new battery pack. DO NOT ATTEMPT TO
REPAIR IT! To avoid injury and risk of fire, explosion, or
electric shock, and to avoid damage to the environment:
•
Cover the battery's terminals with heavy-duty adhesive
tape.
•
DO NOT attempt to remove or destroy any of the
battery pack components.
•
DO NOT attempt to open the battery pack.
•
If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.
•
DO NOT place these batteries in your regular
household trash.
•
DO NOT incinerate.
•
DO NOT place them where they will become part of
any waste landfill or municipal solid waste stream.
•
Take them to a certified recycling or disposal center.
10
INSTALLATION
10.1
CONNECT THE ADAPTER
1. Connect the plug (1) to the socket (2).
2. Turn clockwise the plug (1) to secure.
3. Connect the plug (3) to the socket (4).
4. Turn clockwise the plug (3) to secure.
Pull the lock button (5) to release the cable plug.
WARNING
NOTE
English
10.2
CHARGE THE BACKPACK
BATTERY
1. Connect on end of the adapter to the backpack battery.
2. Connect the other and of the adapter to the battery pack.
3. Plug the charger into an AC power outlet.
10.3
PUT ON THE BACKPACK
1. The backplate is fastened to the hip belt through the
pocket in the back.
2. The shoulder straps are attached to the D-rings at the back
of the hip belt.
10.4
ADJUST THE BACKPACK
HARNESS
10.4.1 INSTALL THE HARNESS
•
Pull the ends of the straps downward to tighten the
harness.
6
Publicidad
