Publicidad
Idiomas disponibles
Idiomas disponibles
5.
If the burner does not light, turn the burner control to OFF, wait 5 minutes and
repeat the lighting procedure.
6.
When the burner is lit, release the control knob and adjust the flame by turning
the knob between HI and LOW.
7.
You can now place food on the cooking grates.
8.
After each cooking session, open the lid and turn the control knobs to the HI
position. Let the burners burn for 5 minutes with open lid. This will burn off
cooking residue and make the cleaning easier.
9.
Turn the control knobs to OFF and wait for the product to cool before closing
the lid.
10. Disconnect the gas cylinder following the instructions in 3.6 "Disconnecting the
gas cylinder after use".
11. When the product has cooled, clean and store according to the instructions in 5
"Maintenance and cleaning" and 6 "Storage".
NOTE
◊ If the burner fails to light after sever attempts, try lighting it using a match. Place
a match in the match holder and use the holder to slide the lit match through
the cooking grates to the left of the burner you wish to light. Press and turn the
burner control knob to HI position.
3.5 Tips for cooking
• To prevent food from sticking to the grate, apply a thin layer of cooking oil or
vegetable oil with a brush to the grill each time before putting new meat on it.
When cooking for the first time, the coating color may change as a result. This is
normal.
• To reduce risks of fire, keep the barbecue clean, use lean cuts of meat and ovoid
cooking on very high temperature.
• Place delicate foods like fish and vegetables in aluminum foil for indirect cooking.
• To avoid losing natural juice, use long handled tongs or spatulas instead of forks
and turn food just once during cooking.
• You can adjust your burners to different levels so food can be prepared to
different internal temperatures at the same time.
3.6 Disconnecting the gas cylinder after use
1.
Close the cylinder's valve by turning the operating lever G2 to the 9 o'clock
position.
2.
Press the release button G3 and pull the regulator G1 upwards. (Alternatively:
Rotate the nut on regulator G1 anti-clockwise to release it).
3.
Store the regulator G1 with the gas hose under the product, making sure the
hose is not twisted.
4.
Store the gas cylinder correctly following the instructions in chapter 6 "Storage".
Always store the gas cylinder outdoors.
32
Publicidad
