4. Slide each pane of Plexiglas up and off the frame and then peel off the
clear film
from both sides. See figure 2.
5. Replace the panes of Plexiglas. Fill the machine with 2" SmileMakers
Toy Capsules.
6. Place the lid on top of the machine, ensuring that the guide spring on
the underside of the lid fits over the
center rod. See figure 3.
7. Turn the key clockwise until the lock is secure. Do not overtighten the
lock.
2.To retrieve coins:
Open the coin box with the key and take out the coins
Note: do not over tighten the lock as only a snug fit is necessary.
If you have any questions about our product, please get in touch with our
customer service; thank you!
- 4 -