2/5
WARNING /
Important
Please read this manual and follow its instructions carefully. To empha-
size special information, the symbol
TION, NOTICE and NOTE have special meanings. Pay particular atten-
tion to messages highlighted by these signal words:
Indicates a potential hazard that could result in death or serious
injury.
Indicates a potential hazard that could result in minor or moder-
ate injury.
Indicates a potential hazard that could result in vehicle or equip-
ment damage.
Indicates special information to make maintenance easier or instruc-
tions clearer.
1. Check that the kit includes all the parts listed on the first page.
Precautions
for
2. Check each part in the kit for scratches or any form of damage.
Installation
3. Park the vehicle on a level ground.
4. Remove the ignition key from the switch and store it in a safe place.
5. Disconnect the negative (–) cable from the battery.
6. Protect any items removed or to be installed from scratches by plac-
ing them on a soft cloth first before putting them on the ground.
7. Use care not to cause any damage to the body of the vehicle during
installation of the accessory.
Tighten bolts to the torque indi-
Tightening
cated in the right table as stan-
Torque
dard value unless otherwise
explicitly specified.
The value shows conventional
on "4" marked bolt tightening
torque. For other bolts not listed
in the table, refer to the service
manual.
GENUINE SUZUKI ACCESSORIES
CAUTION / NOTICE / NOTE
WARNING
CAUTION
NOTICE
NOTE
and the words WARNING, CAU-
Tightening Torque
Diameter
(mm)
N· m
5
3.0
6
5.5
8
13.0
10
29.0
kgf-m
lbf-ft
0.3
2.0
0.55
4.0
1.3
9.5
2.9
21.0