Exquisit KS16-V-H-010D Manual De Instrucciones página 30

Setting up and connecting
ATTENTION
APPLIANCE DAMAGE!
Do not tilt the appliance more than 45° when mounting the door in order not to damage
the refrigerating system.
Tools required for changing door hinges:
Swapping door hinges
STEP-BY-STEP INSTRUCTIONS
1. Release the upper hinge.
2. Lift off door and place safely to one side.
3. Remove the pin from the lower hinge and insert it on the
other side.
4. Remove the pin from the top hinge.
5. Turn hinge by 180° and reinsert the pin.
6. Carefully fit the appliance door onto the pin of the lower
hinge and door.
7. Insert the pin of the top hinge into the hole of the
appliance door.
8. Screw on the hinge on the left side.
9. Align appliance door horizontally and vertically.
10. Make sure that the seals close well. Readjust the hinges if
necessary.
11. For horizontal stand, adjust the appliance with the front
feet.
Page | 30
DESIGNATION
Crosshead screwdriver
Flat screwdriver
Roll fork spanner
TOOL
FIGURE