Nuna MIXX next Manual Del Usuario página 9

Arm Bar
It is always recommended that the arm bar be used, but
it is not a restraint device. Always secure the child with
the harness.
1
- Align the arm bar ends with the arm bar mounts, and
insert until it clicks into place. A "click" sound means the
arm bar is assembled completely.
2
- To remove the arm bar, press the arm bar release buttons
(1) and lift the arm bar up. (2)
3
- Fasten the inner snaps of the seat pad to the inside of
the seating area as shown.
Check Set Up
Stroller frame is completely open.
Front and rear wheels are securely attached.
Canopy is attached to stroller frame.
Arm bar is securely attached.
16
MIXX next instructions
1
click
2
2
1
1
3
17
MIXX next instructions