Uline H-11417 Manual Del Usuario página 3

ATTACH BROOM TO FORKLIFT
1. With the broom on the ground, and mount facing the
lift truck, drive straight and level into the fork pockets
until the tips of the forks are fully inserted into the box
end of the broom mount. (See Figure 5)
Figure 5
Fully Inserted
IMPORTANT! Ensure knob is threaded completely
out and swivel foot is clear of the lift truck fork.
(See Figure 6)
Figure 6
Swivel Foot
PAGE 3 OF 12
ASSEMBLY CONTINUED
Not Fully Inserted
Forks
Knob
2. Gently drop forks to rest on broom hood. Secure forks
to broom hood by hand turning knobs clockwise to
tighten.
NOTE: Do not overtighten the knob assembly as
damage may occur.
NOTE: Do not use an external tool to overtighten
the lock-down knob.
0224 IH-11417