Parkside PLS 3000 A1 Traduccion Del Manual De Instrucciones Originale página 26

GB MT
Technical data
Electric leaf
vacuum/blower ......... PLS 3000 A1
Rated input
voltage U ................ 230 - 240 V~, 50 Hz
Rated power P .......................... 3000 W
Idling speed n ........ 10000 - 15000 min
0
Air speed ........................max. 320 km/h
Air suction volume .............max.14 m
Chopping rate ................................. 16:1
Collection bag ................................ 55 L
Protection class ................................
Protection category .......................... IPX0
Weight (incl. accessories) ............ 4.05 kg
Sound pressure level
(L ) ...................89.2 dB (A); K
pA
Sound power level (L
guaranteed .......................... 102 dB(A)
Blow mode
Sound power level (L
measured .......99.6 dB(A); K
Vibration (a )
h
handle ............... 2.54 m/s
auxiliary handle .. 2.82 m/s
Suction Mode
Sound power level (L
measured .......99.5 dB(A); K
Vibration (a )
h
handle ............... 2.52 m/s
auxiliary handle .. 2.72 m/s
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
26
3 /min
= 3 dB
pA
)
WA
)
WA
= 2.60 dB
WA
; K= 1.5 m/s
2
2 ; K= 1.5 m/s
)
WA
= 2.26 dB
WA
; K= 1.5 m/s
2
; K= 1.5 m/s
2
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
-1
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
II be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).
Safety instructions
This section describes the basic
safety rules when working with the
device.
Symbols and icons
2
2
Symbols on the appliance
Warning!
Read the manual.
2
2
Danger due to materials
blown out of machine!
Remove persons in the
vicinity from the danger area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the power plug be-
fore maintenance and repair
work.