Publicidad
Idiomas disponibles
Idiomas disponibles
Never direct the air nailer towards a person or animal.
Never hold the air nailer in a way that the air purge shows directly towards
your face.
Take care to operate the air nailer in a position, that head and body cannot be
hurt by a kickback of the air nailer!
Kickback may occur by an error in compressed air supply or due to especially
hard segments in the workpiece.
When working always check the thickness of the workpiece and the length of
the nail. Thin workpieces might be strike through entirely.
Always check the shooting angle! When working at angles and corner, the
projectile might bounce back and cause severe injuries!
Never work when you are tired, under the influence of drugs or alcohol or
unconcentrated!
Minimize any sources of distraction in the working environment.
Routine and Distraction are the main sources of severe injuries.
Do not operate the machine in environments with explosion hazard.
Keep children and unskilled persons away from the machine!
When working with the machine, don't wear loose clothing, long hair openly or
loose jewellery like necklaces etc.
Use proper safety clothing and devices when operating the machine (safety
gloves, safety glasses, ear protectors, ...)!
Disconnect the machine every time from compressed air source when you
finished the operation before you lay it down.
9.4
Hazard Warnings
Despite their intended use, certain residual risks remain. Due to the structure and construction of
the machine, hazardous situations may occur when handling the machines:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
HOLZMANN MASCHINEN GmbH
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
www.holzmann-maschinen.at
SAFETY
14
T5040
Publicidad
