Pool Technologie DUO UV Instrucciones De Uso página 33

7. ELECTRONICS UNIT
7.1. First commissioning
The first time you power up the electronics unit, carry out the programming below.
Successive
menus
From 10 to 200 m
increments of 10
Day/Month/Year
Hour/Minute
7.2. Keypad
COMMAND KEY
(depending on
the model)
Switch on the electronics unit.
Switch off the electronics unit (press and hold).
MENU
Access the menus.
Switch on Boost mode for a period of 24 hours.
BOOST
Water temperature displayed for a few seconds
T°C
SALT
pH
Select a value or data item.
Cancel a command.
Back to previous menu.
Stop Boost mode.
Command confirmation.
Enter a menu.
OK
Acknowledge an alarm.
Possible settings
French
English
Deutsch
Español
Italiano
Nederlander
Portugués
3
In-line
Dashboard
A few minutes after switching it on, production starts automatically
When switching it off, the screen and the green LED turn off, and the red LED comes on.
If an alarm has been triggered, first press on
.
For each setting, select a data item with the
confirm with the OK button.
, in
FUNCTION
Navigation
to switch it off.
(press and hold).
menu (press and hold).
buttons, then
-line
8