Installation Instructions; Before You Start - Danby DWM99W Manual De Instrucciones

21. Always follow the fabric care instructions
supplied by the garment manufacturer.
22. Never operate the washer with any guards
and/or panels removed.
23. DO NOT operate the washer with broken or
missing parts.
24. DO NOT by-pass any safety devices.
25. Failure to install, maintain, and/or operate this
machine according to these instructions may
result in conditions which can produce bodily
injury and/or property damage.

BEFORE YOU START

Tools
For most installations, the basic tools that you
will need are:
Screwdriver
Wrench
SAFETY INSTRUCTIONS CONTINUED

INSTALLATION INSTRUCTIONS

Pliers
NOTE:
The WARNING AND IMPORTANT SAFETY
INSTRUCTIONS appearing in this manual are
not meant to cover all possible conditions and
situations that may occur. It must be understood
that common sense, caution and carefulness
are factors which CANNOT be built into the
washer. These factors MUST BE supplied by
the person(s) installing, maintaining, or
operating the washer.
Always contact your dealer, distributor, service
agent or the manufacturer about any problems or
conditions you do not understand.
Electrical
The washer needs a 120 V~/60 Hz, polarized three
slot effectively grounded receptacle. For more
detailed information refer to the Section on
Electrical Requirements
Water
The washer needs standard 3/4 inch water supply
faucets with a pressure between 0.02 MPa and .08
MPa. For more detailed information refer to the
Water Supply Requirements
Specifications
1. Rated Voltage
2. Rated Frequency
3. Rated Current
4. Max Washing capacity
and Spin dry capacity
5. Enter water pressure
6. Net weight
7. Size(D X W X H)
3
120V~
60Hz
2.5A
4.0 kg
0.02 MPa ~ 0.8 MPa
36kg
545mm x 550mm x 890mm