Muskoka 320-42C-10 Manual Del Usuario página 7

Installation - Wall-Mount
1
Remove the mounting bracket from
the fireplace
□ Remove the wall mounting bracket (C) from the back of the
fireplace (A) by unscrewing the two wing-bolts from the top
of the fireplace and sliding the bracket off the back of the
fireplace.
2
Positioning the mounting bracket
□ Choose a solid wall. Position the mounting backet (C) where
the electric firebox (A) is to be installed on the wall, and
ensure that the mounting bracket (C) is level and at least
91cm (36in) above the floor.
□ Use a pen to mark the 4 mounting holes on the wall at the
desired mounting location, using the mounting bracket (C) as
a template.
3
Securing the mounting bracket
□ Insert the 4 self-drilling wall anchors (CC) into the wall where
previously marked. If installing the mounting bracket (C) to a
wall stud, there is no need to drill the holes in the wood and
no need for the plastic wall anchors (CC). It is recommended
to install the mounting backet to at least one stud. Secure
the mounting bracket (C) to the wall using 4 large screws
(BB).
4
Hanging the electric firebox
□ Hang the electric firebox (A) on the mounting bracket (C).
□ Secure the firebox (A) to the mounting bracket (C) with the
two wing-bolts removed in Step 1.
C
C
A
C
C
A
7