Filter Holder Fork Height Adjustment; Maintenance Of The Grinder; Cleaning And Care - Crem Pulse Manual De Usuario

Filter holder fork height adjustment

Cleaning is fundamentally important to the good operation of the grinder and doser.
Neglecting to clean the grinder and doser will allow aromatic oil substances from the coffee to turn rancid which will
have a negative effect on coffee taste. A lack of proper cleaning will also impair the precision of the grinder causing
irregular grinding size and doses.
Before cleaning, make sure that the appliance is disconnected from the mains power.
WARNING!
Always unplug the appliance from the mains power supply before carrying out any cleaning or maintenance operation.
WARNING!
Never pull on the power cord or the appliance when removing the plug from the mains power socket.

Maintenance of the grinder

WARNING!
Maintenance operations must only be performed by qualified service engineers, authorised to perform such operations
by the manufacturer.
WARNING!
Never perform makeshift or precarious repairs and never use non-original spare parts.
For good appliance operation, it is necessary to check and if required, replace the grinders burrs for every 350 kg of
coffee grinded.
12

CLEANING AND CARE

Use a screwdriver to loosen the fastening screw on the
filter holder fork It is recommended not to unscrew
the screw completely.
Raise or lower the fork in order to adjust it according
to filter holder used.
Once having set the correct position, tighten the fork
fastening screw.
01
OPERATION