Programming; Grinder Setting; Appliance Switch-On; Dose Dispensing And Setting (Display) - Crem Pulse Manual De Usuario

CLEANING AND CARE

PROGRAMMING

Grind two or three servings of espresso to flush the grinder and outlet of any remaining GRINDZ residues.
Do not use these servings for brewing!

Grinder setting

2 coffee doses dispensing time
2 coffee doses icon
1 coffee dose icon
1 coffee dose dispensing time
1 coffee dose counter
2 coffee doses counter

Appliance switch-on

Dose dispensing and setting (display)

By pressing the key for one dose
By pressing the grinding start key, dispensing and
countdown until zero are started.
Once dispensing is completed, the countdown zero
returns to its set value for a new grinding.
The single dose counter is increased of 1.
By pressing the key for two doses
By pressing the grinding start key, dispensing and
When switching the appliance on, the following screen
is shown for a few seconds.
countdown until zero are started.
this icon lights up.
Once dispensing is completed, the countdown zero
returns to its set value for a new grinding.
The double dose counter is increased of 1.
By pressing the increasing key
key
increased or decreased.
this icon lights.
Note:
i
When switching the appliance on for the
first time it is configured with factory
settings. Change of settings will be
automatically saved and user defined
settings will be loaded automatically if the
grinder is restarted.
the dispensing time of the selected dose is
or the decreasing
15