Troubleshooting - melitta CAFFEO SOLO & milk Manual De Instrucciones

14

Troubleshooting

Fault
Coffee only fl ows
drop by drop.
Coffee does not
fl ow.
Grinder does not
grind the coffee
beans.
Loud grinder noise
The bean symbols
fl ash even
though the bean
container is full.
The valve symbol
illuminates out
of turn.
Not enough milk
froth is formed
during the frothing
process.
Cause
Grinding fi neness is too
fi ne.
Water tank not fi lled or
incorrectly inserted.
Brewing unit is
obstructed.
Beans do not drop into
the grinder (beans are
too oily).
Foreign objects in the
grinder
Foreign objects in the
grinder
Insuffi cient quantity of
ground beans in the
brewing chamber
There is air in the lines
inside the appliance.
The nozzle of the steam
pipe is in the wrong
position.
The steam pipe nozzle
is dirty.
Measure
Set the grinding fi neness
coarser.
Clean the brewing unit.
Run the integrated descaling
programme, if necessary.
Run the integrated cleaning
programme, if necessary.
Fill the water tank and make
sure it is inserted correctly.
Open the valve until water
fl ows out of the appliance and
then close it again.
Clean the brewing unit
Tap lightly on the bean
container.
Call the hotline.
Call the hotline.
Press the button for coffee
dispensing or coffee
strength .
Open the valve until water
fl ows out of the appliance and
then close it again.
If necessary, clean the brewing
unit.
Adjust the nozzle to the proper
position.
Clean the nozzle.
79