Pool Technologie Poolsquad pH Instrucciones De Uso página 20

2.7.5. Calibration of the water temperature measurement
If the temperature sensor is disabled, the menu below does not appear.
Menu
Settings
From - to + 5°C compared to the value displayed, in increments
Temp.
of 0.5°C
calibration
2.7.6. Bluetooth communication
Menu Setting
Mode
Bluetooth
Pairing
Reset
These parameters do not appear if the mode is set to OFF.
Maximum power of the radio 4dbm
Bluetooth frequency band from 2402MHz to 2480Mhz.
During a (non-automatic) software update of the electronics box performed via Bluetooth, the following messages
are displayed in succession:
- Startup in progress
- Preparing for the update in progress
- Download in progress
- Restarting
A progress bar is visible to see the status of the update. The message "Update in progress...XX%" appears as soon as
the device is restarted, then, when the update is completed the message "APP UPDATED COMPLETE!" is displayed.
2.7.7. Resetting the parameters
Menu
Settings
Reset. Sett.
Possible settings
Activation/deactivation
communication
Detection of connectible devices near the
electronics unit (within 60 seconds)
Networking of the electronics unit and
connected devices.
Deletion of the pairing linking the
electronics unit to the connected devices.
Resetting the settings cancels all the settings carried out (factory configuration).
Function
of Bluetooth
Important warning
I
Default setting
Current measurement
Possible
Default setting
settings
ON (to
activate)
ON
OFF (to
disable)
-
8